Digital Light Controller，4 channel，200W/24V
Supports different control modes of light source, including control panel and software.
Nicht gefunden was Sie suchen?
Markus Berger
Sales & Business Development Manager
Camera Solutions
markus.berger@eqphotonics.de
Anfrage stellen
Camera Solutions
Beschreibung
Serial port or network interface for parameter setting and device management. Multiple I/O interfaces for external triggering. Mounts via slide rail or screw holes. Protects against overcurrent, overload, and short circuits.
Product Highlights
Light-source control via front panel or software. — Serial port or network interface for parameter setting and device management. — Multiple I/O interfaces for external triggering. — Mounts via slide rail or screw holes. — Protects against overcurrent, overload, and short circuits.
Specifications
| Product Model | MV-LE200-200W24-4TD |
|---|---|
| Type | Digital Light Controller，4 channel，200W/24V |
| Dimension | 130 mm × 83.8 mm × 169.5 mm (5.1" × 3.3" × 6.7") |
| Weight | Approx. 733 g (1.6 lb.) |
| Temperature | Working temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F) |
| Humidity | 20% RH to 85% RH (no condensation) |
| Input Voltage | 100 VAC to 240 VAC, 50 Hz/60 Hz |
| Cooling Mode | Fan cooling |
| Dimming Mode | Control panel (via pressing button), software (serial port or network interface) |
| Trigger Mode | External trigger and internal trigger |
| Output Current For Each Channel | Max. 3 A |
| Channel | 4-channel |
| Power Supply Interface | C13 220 VAC interface |
| Digital I/O | Opto-isolated input × 4, opto-isolated output × 4 |
| Shell Material | Plastic |
| Ingress Protection | IP30 |
| Certification | CE, KC |
| Drive Mode | Digital, constant voltage |
| Lighting Mode | Continuous, strobe |
| PWM Frequency | 125 kHz |
| Strobe Overdrive | Not support |
| Brightness Level | 0 to 255 |
| Lighting Response Time | < 10 μs |
| Communication Protocol | UDP, Serial |
| Applicable Product | Ring light, bar light, flat light, coaxial light, etc. |
| Input Current | 1.8 A (115 VAC), 1A (230 VAC) |
| Output Voltage | 24 VDC |
| Output Current | Max. 8.3 A |
| Output Power | Max. 200 W |
| Trigger In | High level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC |
| Trigger Out | High level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC |
| Console Interface | RJ45 network interface, DB9F serial port |
| Lighting Output Connector | SMR-03V-BC |