Digital Light Controller，2 channel，500W/48V
Adopts constant current to improve light source stability.
Nicht gefunden was Sie suchen?
Markus Berger
Sales & Business Development Manager
Camera Solutions
markus.berger@eqphotonics.de
Anfrage stellen
Camera Solutions
Beschreibung
Buttons and display enable quick on-device operation. Network interface for parameter setting and device management. External trigger input for switching between lighting modes. Protects against overcurrent, overload, over-temperature, and short circuits.
Product Highlights
Constant-current drive improves light-source stability. — Buttons and display enable quick on-device operation. — Network interface for parameter setting and device management. — External trigger input for switching between lighting modes. — Protects against overcurrent, overload, over-temperature, and short circuits.
Specifications
| Product Model | MV-LE201-500W48-2TD |
|---|---|
| Type | Digital Light Controller，2 channel，500W/48V |
| Dimension | 347.2 mm × 180 mm × 150.8 mm (13.7" × 7.1" × 5.9") |
| Weight | 5000 g (11.0 lb.) |
| Temperature | Working temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature:–20 °C to 60 °C (–4 °F to 140 °F) |
| Humidity | 20% RH to 85% RH (no condensation) |
| Input Voltage | 100 VAC to 240 VAC, 50 Hz/60 Hz |
| Cooling Mode | Fan cooling |
| Dimming Mode | Control panel (via pressing button), software (serial port or network interface) |
| Trigger Mode | External trigger and internal trigger |
| Output Current For Each Channel | Max. 8 A |
| Channel | 2-channel |
| Power Supply Interface | C13 220 VAC interface |
| Digital I/O | Opto-isolated input × 2, opto-isolated output × 2 |
| Shell Material | Plastic + SECC |
| Ingress Protection | IP30 |
| Certification | CE, KC |
| Drive Mode | Digital, constant current |
| Lighting Mode | Continuous, strobe |
| Brightness Level | 0 to 255 |
| Lighting Response Time | < 10 μs |
| Communication Protocol | UDP, Serial |
| Applicable Product | Line scan light (with 19M-8H and 19M-8A connector) Vcsel line scan light only supports connection to a single channel. |
| Input Current | 5.3 A (115 VAC), 2.65 A (230 VAC) |
| Output Voltage | 48 VDC |
| Output Current | Max. 10 A |
| Output Power | Max. 500 W |
| Trigger In | High level 4.5 VDC to 24 VDC, low level 0 VDC to 2 VDC |
| Trigger Out | High level 10 VDC to 24 VDC, low level 0 VDC to 2 VDC |
| Console Interface | RJ45 network interface, DB9F serial port |
| Lighting Output Connector | 19M-8H (Female) × 2 |